Aluminum Honeycomb Press Machine
The tot press machine is used to cure and bond the stacked aluminum foil sheets into solid honeycomb blocks. Under controlled temperature, pressure, and pressing time, the adhesive layers are cured so that the block can be sawn and expanded in later processes.
For honeycomb core production, uniform pressure, stable heating, and accurate platen flatness are important because they influence bonding strength, block stability, thickness consistency, and final expansion performance.
- Working Layers
- 2/3 layers
- Hot Platen Spacing
- 200mm
- Process Stage
- Pressing
- Suitable Material
- Aluminum Honeycomb Core
Technical Parameters
Final parameters are confirmed according to material type, working width, target capacity, electrical standard, and project configuration.
| Parameter | Value | Note |
|---|---|---|
| Working Layers | 2/3 layers | |
| Hot Platen Spacing | 200mm | |
| Maximum Pressure | 100T–300T | |
| Heating Power | 100KW | |
| Heating Method | Electric heating / oil heating system | |
| Power Supply | 380V or customized |
Scope of Supply and Project Confirmation
The final equipment scope is confirmed in the quotation and technical agreement according to the project requirements.
Standard Supply
Machine configuration, control components, standard accessories, and included items are listed in the quotation.
Optional Configuration
Options are matched to material type, width, capacity, voltage, automation, and local operating requirements.
Acceptance & Documents
Technical parameters, test items, operating documents, and acceptance requirements are confirmed before delivery.
Packing & Delivery
Packing method, shipping conditions, destination information, and installation arrangements are confirmed by project.
Installation, Training and After-Sales Service
Training & Technical Support
Pressing temperature, pressure, and time setup
Honeycomb block curing process guidance
Bonding quality and curing defect troubleshooting
Production recipe setup for different materials
Related Honeycomb Equipment
Aluminum Honeycomb Sawing Machine
The sawing machine cuts hot-pressed honeycomb blocks into slices, strips, with required core thicknesses. This process…
View Equipment
Aluminum Honeycomb Expanding Machine
The Aluminum Honeycomb Expanding Machine is used to expand bonded aluminum honeycomb slices into a uniform…
View Equipment
Aluminum Honeycomb Stacking Machine
The Stacking Machine receives glued and cut aluminum foil sheets from the gluing process and stacks…
View EquipmentRequest a Quote & Technical Proposal
Share your project status and key technical requirements. Mex-core will review the application and recommend a suitable equipment configuration.